Autotek Ss2500.2 Series 2-channel Class Ab Amp 2,500 Watts Super Sport power!

Description
Autotek SUPER SPORT Series delivers huge power in an efficient heatsink. Features include built-in electronic crossovers and high-level inputs. 2500 watt two channel car audio amplifier

Category: MaxxFactory Products
SKU: 806576226529
Part #: SS2500.2

Specifications
  • CLASS
    Class A/B
  • VARIABLE VOLTAGE
    6 - 0.2V
  • SIGNAL TO NOISE
    >94dB
  • FREQUENCY RESPONSE
    20Hz-20kHz
  • CROSSOVER TYPE
    Selectable FULL - LPF - HPF
  • HI PASS CROSSOVER:
    12DB PER OCTAVE:
    120HZ-3kHz
  • LOW PASS CROSSOVER:
    12DB PER OCTAVE:
    50Hz-250Hz
  • TONE CONTROL
    Bass EQ @45Hz
  • BASS BOOST
    Selectable 0 / 6 / 12dB
  • POWER OUTPUT @ 1 OHM:
    No
  • POWER OUTPUT @ 2 OHMS:
    2 x 1250 W
  • POWER OUTPUT @ 4 OHMS
    2 x 625 W
  • MONO BRIDGED @ 4-OHMS
    1 x 2500 W
  • TOTAL CHANNELS
    2
  • AUDIO INPUTS:
    RCA Jack
  • AUDIO OUTPUTS:
    NO
  • POWER TERMINAL:
    12V/GND
    8 ga
  • SPEAKER TERMINAL WIRE GAUGE
    16 ga
  • FUSING
    40A x 1
  • DIMENSIONS
    10.75 x 10.25 x 2 in
    27 x 26 x 5 cm
  • WEIGHT
    5.1 lbs (2.31 kg)

Features & Benefits
  • PRE-AMP CIRCUITRY Low Noise PreAmplifier
    Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
  • INPUTS Low voltage RCA Inputs 
    Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path
  • HI LEVEL INPUTS Yes, small connecting adapter 
    Easily tie into OEM audio systems that do not offer RCA output. Molex connector is included
  • OPERATION MODE 3
    Stereo, Bridged Mono or Stereo/Bridged Mono Simultaneously
  • CROSSOVER / SIGNAL SHAPING Electronic 
    Internal 12dB crossovers networks allow for audiophile control of equalization circuits
  • EQUALIZER Electronic 
    Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier
  • CLASS / TOPOLOGY Class A/B 
    High sound quality circuit that allows amplifier to develop high levels of power with minimal distortion
  • OUTPUT DEVICES TECHNOLOGY Pro- Fi™ 
    Pro- Fi™ High Speed MOSFET’s components maximize power efficiency while improving sound quality and minimizing distortion
  • HEAT SINK Sound Shield™ 
    Sound Shield™ Technology assures additional mass in the aluminum heat sink keeps the amplifier running cool while shielding music from distortions that can be caused by heat
  • POWER SUPPLY PWM Power Supply 
    High energy Pulse Width Modulated Power Supply delivers power with minimal impact on the electrical system
  • OUTPUT CONNECTIONS Nickel Plated 
    Nickel Plated Brass Connection with terminals allow for secure connection while resisting corrosion
  • CONNECTIONS TYPE Screw Down Connectors 
    Easy access for hand tool allowing a quick and secure connection
  • SIGNAL PASS THROUGH No
  • DIAGNOSTICS LED System Protection Circuitry 
    Monitor overload and speaker short protection with lighted indicators on the amplifier end panel

Write a review

Note: HTML is not translated!
    Bad           Good

Autotek Ss2500.2 Series 2-channel Class Ab Amp 2,500 Watts Super Sport power!

  • Views: 344
  • Brand: Autotek
  • Product Code: SS2500.2
  • Availability: In Stock
0 Product(s) Sold
  • £110.99